MASK PROBLEMS ROS 4.3 IN IP ADDRESS?

RouterOS General
1

Hi all,


I’m configuring a ROS4.3 in a RB450G.

When I create a new IP to the ether5, with 10.1.23.1/16, the new network is automatically set as 10.1.23.0 and broadcast to 10.1.255.255.

Broadcast is OK, but network isn’t well calculated. I think it must be 10.1.0.0.

This is an error? or this is that I need a coffee?

2

I deleted all the other IPs and set this the first and it works fine now.. ¬¬u

Now I can’t get the bad network again. As I have to configure other board with same config, I’ll try. Is strange.

I go to take a coffee… xD