My motherboard (asus p5gd1-vm) has a two different IDE controllers, one for the main and one for the secondary.
Giving the fact that I have a DOM, I must use both of them, the primary for the system and the secondary for the HD like cache-drive.
The only problem in this design is that MT doesn’t have the driver about the secondary IDE controller. It is recognize but not load the driver.
These are the infos from the pci resource:
Device: 01:03.0
Vendor: Integrated Technology Express, Inc.
Name: unknow device (rev:17)
Category: Mass storage Controller
Vendor ID: 0x1283
Device ID: 0x8211
IRQ: 5
IO: 6400-640f
Hope you can compile and place the linux driver inside MT.
Thanks
Rosario