Hi!
I’ve recently purchased a hAP ac and hAP ac lite and I have them connected via WDS. I can connect to both fine from clients, but I can’t seem to get over 54mbps link speed from clients or between the 2 mikrotiks (I’ve tried from multiple client devices)
Export of wireless from device 1 (hAP ac, used as main router):
# jun/25/2017 12:27:12 by RouterOS 6.40rc24
# software id = LYFS-6WSL
#
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa2-psk eap-methods="" group-ciphers=tkip \
management-protection=allowed mode=dynamic-keys name=19 \
supplicant-identity="" unicast-ciphers=tkip wpa2-pre-shared-key=********
/interface wireless
set [ find default-name=wlan2 ] band=5ghz-a/n/ac channel-width=20/40/80mhz-Ceee \
country="united kingdom" disabled=no distance=indoors frequency-mode=\
regulatory-domain mode=ap-bridge security-profile=19 ssid=19 \
vht-supported-mcs=mcs0-9,mcs0-8,mcs0-7 wds-default-bridge=bridge1 wds-mode=\
static-mesh wireless-protocol=802.11 wps-mode=disabled
/interface wireless wds
add disabled=no master-interface=wlan2 name=wds-upstairs wds-address=\
**:**:**:**:**:58
Export of wireless from device 2 (hAP ac lite):
# jun/25/2017 14:20:29 by RouterOS 6.40rc24
# software id = QR1L-AJCN
#
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa2-psk eap-methods="" group-ciphers=tkip \
management-protection=allowed mode=dynamic-keys name=19 \
supplicant-identity="" unicast-ciphers=tkip wpa2-pre-shared-key=********
/interface wireless
set [ find default-name=wlan2 ] band=5ghz-a/n/ac channel-width=20/40/80mhz-Ceee \
country="united kingdom" disabled=no distance=indoors mode=wds-slave \
security-profile=19 ssid=19 vht-supported-mcs=mcs0-9,mcs0-8,mcs0-7 \
wds-default-bridge=bridge1 wds-mode=static-mesh wireless-protocol=802.11 \
wps-mode=disabled
/interface wireless wds
add disabled=no master-interface=wlan2 name=wds-main wds-address=\
**:**:**:**:**:2E
I saw this post from late 2016, but I’ve already tried going to latest RC: http://forum.mikrotik.com/t/wds-link-stuck-on-54mbps/104734/1
Hope someone can help!
