Micro SIM card stuck in LHGG LTE6 kit

Hardware MikroTik hardware general
1

I wanted to test four different ISPs with the LHGG LTE6 kit to check which one provides the fastest bandwith in my area.

The first micro SIM card I used was inserted and ejected with no difficulty, but the second one got stuck. I’ve been trying to pull it out with a SIM card eject tool but no succes, so I decided to check if anyone had the same problem. While I was browsing the Internet for a solution, my reckless brother came up with “a brilliant idea” of using a small flat screwdriver and it only worsened the situation.

Is there any possibility of removing the SIM card?

2

Take the cover off and take out the PCB, you should be able to work it out with a fine screwdriver or skewer. Same thing happened to me.

3

I had the same problem with LHGG LTE6. The inserted SIM card was not removed. I had to open the antenna and cut the edges of the gap with a sharp construction knife; now everything works as expected.
But now another problem: the SIM from one operator is working, and from the other two it says sim card is not inserted.