MicroUSB console CC1009

[ubbertik]

Hello guys.

Last night i was being stupid messing around with some rules on the fw, and forgot to set a higher priority to some rules that allow me the access to the router, and now i cant get in, its working fine except for that.

Is it posible to get in via the micro usb port, does this port function as a console port? If so, can you give me some instructions please, what settings uses, do i need to use putty?

Safe mode was enable, i don’t know what happened =(

ROUTER: CCR1009-8G-1S-1S+

Thanks

[andriys]

@ubbertik

Is it posible to get in via the micro usb port, does this port function as a console port?

No, it does not.

You have two options:

1. Connect via serial console port. I know it’s now hard to find a computer equipped with a serial port, but you can use a USB-to-Serial adapter for this.
2. Reset your device, but you’ll lose your configuration in this case.

[ubbertik]

@andriys

@ubbertik

Is it posible to get in via the micro usb port, does this port function as a console port?

No, it does not.

You have two options:

1. Connect via serial console port. I know it’s now hard to find a computer equipped with a serial port, but you can use a USB-to-Serial adapter for this.
2. Reset your device, but you’ll lose your configuration in this case.

Thanks a lot for the quick response.

May be i will have to reset it, do you know if the router deletes the configurations backup once it has been reset ?
What are the settings for serial console connection, baudrate, parity, etc?

[jarda]

Reset keeps the files. But maybe you can try mac connection from some ports before you decide to make the reset. Most probably you will get in.

[ubbertik]

@jarda
Thanks for the hint, i will try that