Mikrotik 2Ghz PTP Speed Question

RouterOS Wireless Networking
1

I just successfully made my first Point-to-Point Setup with 2 Mikrotik SXT-Lite2 Devices.
The Distance is only around 250m which are Bridged. Signal Strength is arount -40db.

The AP is configured as Bridge, and the Station as Station-Bridge, and with the Bandwidth Test from the Mikrotik Panel I only get around 20-25Mbps.
The Devices are configured to B/G/N Speed.
What could I do to increase Bandwidth Speed, which Protocol would be best to use.
The Setup has been made in a small Village, so there are not so many Ap’s in the 2ghz frequency.

As far as I understand, the SXT-Lite2 is a N-capable Device, with Speeds up to 150Mbps,
so my first Guess was that I should be able to gain around 100 - 120Mbps out of the PTP Tunnel.

Any help or Advice appreciated.

2

Try testing UDP as TCP bandwidth test utility uses too much CPU power or try testing through the wireless link.

3

the test has been made using UDP.
So, should I usually get a better throughput than my 20-25 Mbps?

Could I set any special Settings to increase Bandwidth?
Like nstreame, nv2 or wds?

4

you should get more than 20-30mbps
Make support output files from both ends and send them to support@mikrotik.com for inspection.
Yes, we suggest to use Nv2 wireless protocol.