Mikrotik and Vlans

RouterOS General
1

Hi,

I have a little problem here. I want to make mikrotik to forward tagged and untagged vlan to a port.

On for example eth5 i have 2 vlans, vlan 100 and vlan 101 for an example, and i want to forward them to eth1 but one of them should be untagged.

I tried to make vlan101 on eth1 and bridge it to vlan101 on eth5 and then, bridge vlan 100 on eth5 to eth1 interface, but after that vlan101 is not working on eth1.

Is there any way to make it work like on for an example cisco routers where i’m making trunk with native vlan and allowed vlans?

2

Ok, NVM on ROS 6.5 it’s working.

3

I read wiki.mikrotik.com/wiki/Manual:CRS_examples and found there comand:

/interface ethernet switch ingress-vlan-translation

and try in on RB2011 line (OS 6.1 and 6.5)

this comand is only for Cloud Router Switch ???
and can’t be used in RB**** line?
or it can be done another way on RB**** line?

4

KoDAk,
Switch-chip features for RouterBoards other than Cloud Router Switch are described in this article:
http://wiki.mikrotik.com/wiki/Manual:Switch_Chip_Features