Hello
Is it possible to provide IPV6 to clients with DHCP. It is quite easy with PPPOE but it seems more complicated if you don’t do PPPOE but DHCP.
Currently I am able to assign IPv4 to clients using DHCP and radius (no pppoe)
You can directly use DHCPv6 server, to hand PDs to clients with radius + dual stack queues to tie a RADIUS session for both IPv4 and IPv6 together for each server on a given VLAN.
It will work, but MikroTik doesn’t support ia_na, not mandatory, but it would be good if they did.
IPv4 config, similar to v6:
https://wiki.splynx.com/en/4_1/networking/authentication_of_customers/mikrotik_dhcp_radius