In my base station I have a Mikrotik AP in ap-bridge mode, all the interfaces are bridged into bridge1 and support wds(WDS Mode: dynamic, WDS default bridge: bridge1). While in one of the client’s station I have a Mikrotik CPE(RB411) in station wds mode, eth1 and wlan1 bridged together into bridge1, WDS mode: dynamic, WDS default bridge: bridge1. This works fine, only that on many ocassion when I am just putting on the CPE for the day I wont be able to access internet. When I enter the CPE through winbox the wlan1 interface would’ve disappeared from both interface and wireless table. Then I am helpless, so what I do now, I will power the CPE off and wait for sometime before powering it on then I can access the internet. When I put it on too early to the it wont connect internet. This is a serious problem no client is going to take this from me. Pls I appeal to everyone that know what to do to help me out
what version of RouterOS are you using… I have had trouble with ver 3.10 with rebooting…
Once I upgrade to 3.20 or 3.23 and trouble disappeared
my version is 3.10 . Anyway pls help me with what u did to solve d problem
he is clearly telling you to upgrade the version !
Thanks i will give upgrading it a try i will be back