Hi
Does anybody setup 802.1x auth with LEAP through mikrotik and freeradius.
Im in middle of that, mikrotik logs 802.1x auth timeout …
Client registered for the moment in registration table and after that timeout error disappear…
Any hints…?
I forgot
My goal is wifi client to auth. with u/p.
But without certificate.
On mikrotik is setup in security profile-passthrough,no certificate, radius client is up and only wireless is checked!
I got on freeradius that authorisation is ok, client is connected for 15-20sec and then disconn. In mikrotik logs show 802.1x timeout error.
Now im not getting any errors in freeradius logs but on mikrotik its said " 802.1x timed-out, EAP failure)
any hint?
Still getting EAP - failure message on mikrotik log, no error on radius, i got :
Sending Access-Challenge of id 89 to X.X.X.X port 37651
NAS-IP-Address == X.X.X.X
NAS-Port-Type = Wireless-802.11
Framed-Pool = “*********”
Mikrotik-Wireless-Forward = 1
EAP-Message = 0x03020004
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x8261c84c8363d91a89ea07206448edae
Finished request 12.
Can somebody tell me is wireless Atheros11n (AR5008)card has 802.1x support?
Is the FreeRADIUS server showing anything in the log? Are you sure this is the correct port? Mine is 1812 for auth and 1813 for accounting.
Sending Access-Challenge of id 89 to X.X.X.X port 37651