i am trying to setup a mikrotik rb2011 router with an Unifi-AP..
The setup should be pretty simple…
what i would like to get working is this:
setup the mikrotik router for dual wan with failover ( backup line ) only.. So NO load balancer …
then i need 3 Wifi networks followed as :
Wifi for : Managers, Staff, and Guests..
Vlan10-Managers <==== own ip range + dedicated port for network printer
Vlan20-Staff <==== own ip range + dedicated port for second network printer
Vlan30-Guest <==== own ip range and speed limit
Now i found out when i connect the devices my unification controller cannot find the unifi-ap… and vlans dont work… but if i am right both devices support layer 3..
Is here someone who could help me with this …
best regards Oscar