Greetings from Greece Athens
Im New in MIKROTIK Routers and we buy in our work one Router Board 1200 MIKROTIK
I have the following problem
We have our MTK 1200 with the following Conditions
ether1 First Adsl Modem In Brige mode
ether2 Local lan 192.168.1.1/24
ether3 Second Adsl Modem In Brige Mode
ether4 Third Adsl Modem In Brige mode
ether5 None
ether6 None
ether7 Second Lan 10.10.10.1/24 and we have an accesspoint device on it
ether8 Third Lan 192.168.100.1/24 Various Ip Products Voip PBX - Voip Phones - Voip Door Phones etc
ether9 an public set of sixteen public ip address
pppoe-out1 First ppoe connection
pppoe-out2 second ppoe connection
pppoe-out3 third ppoe connection
Now all working great except the pppoe-out 2 and pppoe-out2
Because we have some services on adsl one we want to make our 15 PC’s To getting out for download or upload mails and other things from pppoe-out2 and the logistics department to take internet from the pppoe-out3
how can i do that
for example CLIENTPC1 have the ipaddress 192.168.1.10 and now is getting out from the internet connection pppoe-out1 how to make getting out from pppoe-out2 or pppoe-out3 please can some one give me an example or exactly what can i type in terminal to make this work? thank you all
i dont have experience in mikrotik all i was do is from a lot of reading wikis from mikrotik and from internet videos about mikrotik