Hi!
I have situation like this:
2 networks
One is in destination 1.
Here are :
RB2011UiAS-RM (192.168.0.1/24 this share internet and making routings etc…
http://routerboard.com/RB2011UiAS-RM
From RB2011UiAS-RM goes cable to the roof :
SXT SA5 (192.168.0.18)
http://routerboard.com/RBSXTG-5HPnD-SAr2
atm is here are bridge what get always same ip from RB2011UiAS-RM dhcp 192.168.0.18
WIFI is AP Bridge mode
Destionation 2
Here are: SXT 5HPnD
WIFI mode is: Station Bridge
Wifi get ip with dhcp RB2011UiAS-RM from destination 1.
network port ip adress is added just permanently manually 192.168.1.77/24
here are no bridge yet configured to avoid problems between 2 networks.
Behind SXT 5HPnD internal network:
Huaweii B593
192.168.1.1/24
dhcp is on
possible to make dmz and add a little mikrotik router after huawei.
But think it is not nessesary?
I wish to do something like this:
-
Cumputers/Devces can see eachoters and can communicate.
-
DHCP servers do not distrub eachother
-
Destination one cannot go to destination 2 internet and other way (do avoid problems)
Thank You!