I have followed this how to
http://www.mikrotik.com/testdocs/ros/2.9/interface/eoip_content.php#5.19.3
But it is not working
I have a pc running mikrotik 2.9.39 (MT) and a routerboard 192 running 2.9.46 (MT2)
- I have created a pptp-dial-in on the MT 192.68.70.250 for local and 192.168.70.252 for remote IP
- I have created a pptp-dial-out in the MT2 connecting to the WAN ip of MT
The pptp connection is setup ok But i cannot ping from 192.168.70.250 to 192.168.70.252
When i check using IP neighbours i can see the MT`s on both ends
I also created an EOIP connection but this is off-course not working because of the " cannot ping issue"
Anyone?
P.S. Its a damn fine board the routerboard 192. I will replace mij P3 900mhz machines with this one