Mikrotik Web Proxy on seond HDD help

RouterOS General
1

Hi ,
Dear mikrotik professional and users


Here is the description of my problem , iam running mikrotik 4.1v and i would like to add the secondary HDD and want to enable trasperent proxy i know how to config and all , But my problem is i think the router is not detecting the SATA2 because its not showing highleted option in ip>webproxy>webproxy setup

My router is ruuning on SATA1 and its always showing only SATA 1 So, please help me in adding secondary HDD which is NTFS formatted (i hope mikrotik should format with its file system when attached) Procedure

Thanks,
SAthish

2

what’s in ‘Store’ menu?

3

Store menu where is it ? please tell me

sathish

4

System / Stores

5

Thanks Very much , i didnt find the simple menu

Soorry guys

Thanks
Sathish

6

Hi guys please tell me can i implement

http://wiki.mikrotik.com/wiki/Queue_with_Masquerading_and_Internal_Web-Proxy

fot the hotspot running router

Thanks,
Sathish

7

It doesn’t make sense to implement that with a Hotspot. You already have masquerading in place if the Hotspot is running, and you’re already queueing with Simple Queues because that’s how the Hotspot feature works.

8

ok Thanks for ur advice fewi, can u please tell me if it works for the bypassed hotspot people

Thanks,
Sathish

9

I don’t understand the question.

10

ok, i will explain clearly iam having 500 lan internet customer under my MIkrotik server which is running v4.1

My aim is to serve the webpages which are in the chache @ max possible speed supported by my ethernet card and MISS traffic should be restricted as per my specification iam presently running hotspot service on the router u said tht it doest make sense

So iam ready to shut down the hotspot service and reconfigure again with the http://wiki.mikrotik.com/wiki/Queue_with_Masquerading_and_Internal_Web-Proxy

is this work fine ?
and also why iam running hotspot service is for the only requirement is the hosts tab it will show the mac and ips of the new clients and i can easly copy the MAC addresses of them and paste it in ARP entries (because iam using ARP- Replyonly) if there is other option which i can get the mac and ip of the clients which are connected to my network i will imeediatly shutdown the hotspot and will use normal masquerade rule and above webproxy

Please advice Fewi, i would be thankfull if u can provide the nice solution for it

Thanks,
Sathish