Mikrotik Wifi and Wyze Cameras

RouterOS Wireless Networking
1

I upgraded from a “hAP ac lite[952Ui-5ac2nD]” to a “hAP ac^2[RBD52G-5HacD2HnD]” both running v7.1 and region United States. The Wyze cameras refuse to connect to the newer ac^2 arm. I have gone all over the Wifi and WPA2 settings in both routers and both are identical. The Wyze camera just never registers nor can I see a log file entry that states its trying. My iphone and ipad work just fine on both routers. Any ideas?

2

yes.

  1. Send me all your terrible cameras
  2. Then buy better cameras
  3. Alternatively you can post your config because we dont have or know how to use crystal balls
    /export hide-sensitive file=anynameyouwish
3 
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-XX country="united states" disabled=no frequency=auto mode=\
    ap-bridge ssid=mynet wireless-protocol=802.11 wps-mode=disabled
set [ find default-name=wlan2 ] band=5ghz-a/n/ac channel-width=20/40/80mhz-XXXX country="united states" disabled=no frequency=auto \
    mode=ap-bridge ssid=mynet wireless-protocol=802.11 wps-mode=disabled
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa2-psk eap-methods="" mode=dynamic-keys supplicant-identity=MikroTik
4

Since you cannot follow simple advice
/export hide-sensitive file=anynameyouwish

and decided that you know what he problem is by only showing a couple lines of the config,
there is no need for further assistance.

L8R