Hi All,
I was not sure as to where to post this as it covers a few setup topics. I am very new to Router OS and Mikrotik. Due to the immense feature list and cost effectiveness of products I have decided to try them out. I have a scenario below and would like some configuration advice on the set up I would like to try out.
Scenario:
I currently have neighbours in my complex with very little internet connectivity and would like to set up a VLAN with a separate SSID for them to use and shape their traffic accordingly on my firewall.
Equipment on Site:
10MB/1MB ADSL.
Pfsense Firewall/Gateway.
D-Link DGS-1210-20 Main Switch.
Mikrotik RB750G.
Mikrotik Routerboard Groove A52HN.
The Pfsense firewall is connected to port 1 on the Dlink Switch.
The RB750G is connected to Port 16 on the link switch and Ether 5 on the RB750.
The Groove A is connected to Ether 4 on the RB750.
192.168.65.0/24 (Main Network, currently no VLAN assigned.)
192.168.70.0/24 (Guest network for Neighbours on VLAN 20)
What would be the best way to configure these Mikrotik Devices?
Thank you.