Mirotik as OVPN server, client install problem

RouterOS General
1

Here is the problem:

I’ve got Mikrotik (ROS 4.11) as OVPN server, and I’ve installed Securepoint OVPN as client on test client. I used this manual as reference: h**p://wiki.mikrotik.com/wiki/OpenVPN

I made my certificate on CACert, i’ve installed root certificate, and server certificate to Mikrotik, made private key, as it was shown in manual.

On test client I installed Securepoint OVPN, put CACert root certificate as CA path, certificate-response copied from Mikrotik as certificate path and private-key copied from Mikrotik as key path. When I try to make connection, it starts to connect, but it cannot establish connection.

What am I doing wrong?

2

Are you using certificates and username+password or just certificates? Correct me if i’m wrong but i think you can only use either certificates +username&pass or just username and pass without certificates. But not only certificates without UN&pass.

I really hope i’m wrong because otherwise i’m gonna have to reconfigure the whole VPN.