xr5 vs. sr5. 42km distance, 37Mbps bandwidth test, usually good signal levels, everything works fine, but several times dayly for 10 minutes we have logs such as follows:
===========AP-site================
04:07:17 wireless,debug wlan1: 00:15:6D:XX:XX:XX attempts to connect
04:07:17 wireless,debug wlan1: 00:15:6D:XX:XX:XX in local ACL, accept
04:07:17 wireless,info 00:15:6D:XX:XX:XX@wlan1: connected
04:07:18 wireless,info 00:15:6D:XX:XX:XX@wlan1: disconnected, extensive data loss
04:07:21 wireless,debug wlan1: 00:15:6D:XX:XX:XX attempts to connect
==========Client-site==============
22:13:47 wireless,debug wlan2: failed to select network
22:13:47 wireless,debug wlan2: delaying scanning
22:13:49 wireless,debug wlan2: STA starts scanning
22:13:50 wireless,debug wlan2: STA scan over, results:
22:13:50 wireless,debug 00:15:6D:XX:XX:X1: on 5250 SSID MANIA caps 0x421
rates 0x3f00 basic 0x100 MT: yes
the problem is that nobody in this forum can help you in problems like that… or ain’t nobody want to help you.
now seriously: big noise arround ap. on frequency quite different from our. problem solved with bigger dishes, sr5 replaced with xr5 and nstreme removed from link.
I am having a simliar problem on a PtMP system running XR2s to Compex 802.11g clients in 10mhz channels.
So far turning off “The Dude” helped the problem. However, I have seen a few clients recieved signal at the AP drop by 10db on occasion still.
I am pretty sure the volume of traffic being lower since shutting off Dude has helped. I am not saying Dude was the problem, but my problem occurs much less since shutting it off.
I’m working on finding the actual problem still, but my link is 100% better now. No disconnects for 48+ Hours.
Any idea why nstreme was causing that behaviour? Did you tested the setup with the bigger dishes, XR5´s but WITH nstreme enabled?
We are experiencing similar behave on a 53Km PtP link with Xr5´s and nstreme, I haven try it without nstreme since they say for those kind of shots nstreme is necesary … mmmh
sure, we have…
dishes 1,5m both sites, signal level between 52 and 83!!! working fine with levels under 80, but… we need 30Mbit link and sometimes smt. goes wrong. i still have no any idea what’s going on.
regards,
C. G.