Any news about mu-mimo and Mikrotik? Do you plan any routerboards suppporting MU-MIMO? When?

I am not able to replicate this http://community.cambiumnetworks.com/t5/PMP-450/PMP450m-500Mbps-Demo/td-p/67561 in my lab with using mikrotik :frowning:

I am not able to replicate this http://community.cambiumnetworks.com/t5/PMP-450/PMP450m-500Mbps-Demo/td-p/67561 in my lab with using mikrotik :frowning: How are you trying and what happens?

In lab PtMP with MT AP with 7 clients I can hope to reach a total of 70mb/s maybe 100 mb/s not more

I am not able to replicate this http://community.cambiumnetworks.com/t5/PMP-450/PMP450m-500Mbps-Demo/td-p/67561 in my lab with using mikrotik :frowning: Ahh, Mikrotik is more comparable to the Cambium ePMP 1000, e.g. they both use Qualcomm-Atheros silicon. The PMP450m uses custom FPGA’s and p…

I watched the video and it looks pretty impressive. I can’t help thinking though that the secret is more down to the antenna being able to isolate the signals rather than an increase in bandwidth/mhz for mumimo. If you think they have 8x8 mimo with 4 clients each client is getting about the normal r…

Many months on and still not available mikrotik CPE & cambium firmware, as always don’t believe product predictions from sales.

Many months on and still not available mikrotik CPE & cambium firmware, as always don’t believe product predictions from sales. Update to 6.40x You can change the duty cycle on AP Side with: -nv2-downlink ratio=80 (making all CPE 80% download + 20% Upload) -nv2-mode= –Options: ---- dynam…

Update to 6.40x You can change the duty cycle on AP Side with: -nv2-downlink ratio=80 (making all CPE 80% download + 20% Upload) -nv2-mode= –Options: ---- dynamic-downlink --fixed-downlink – sync-master and sync-slave.. Works very well, im using 6.40.5 REgards Which work well ? “dyn…

in the 6.41rc there’s a new feature !) wireless - new driver with initial support for 160 and 80+80 MHz channel width; and indeed MT will have its first wave2 device, the next gen cAP with IPQ4018 ( https://www.qualcomm.com/products/ipq4018 ) that has mu-mimo support in hw. the device received FCC …

MU-MIMO?

RouterOS Wireless Networking

anuser September 6, 2019, 5:16pm 23

MU-MIMO is work in progress according to reinis from MikroTik: