Hi,
I am a MikroTik newbie and have just added RB450 to my network. Although by following guides i have managed to setup hotspot and acces to Internet for my existing LAN but my goal is to setup it as per my requirements mentioned below :
Current Scene :
- MT RB450 - WAN (101.x.x.x) eth1 / LAN (172.22.7.11) eth2
- CISCO 1900 - LAN (172.22.7.1)
- LAN PC - (172.22.7.12 - 172.22.7.253)
- DVR CAM - (172.22.7.254) port 9080
a) Currently to access internet i have to setup gateway to 172.22.7.11 manually on my LAN PC.
b) To access URL (172.30.80.3) which runs on CISCO i have to change to its gateway 172.22.7.1
c) Am not able to access my DVR cam from public ip.
Required :
a) Their should be only one gateway to MT distributed by DHCP server and all PC on LAN should be able to access Internet (via hotspot) and at the same time URL (172.30.80.3 which uses 172.22.7.1 gateway at present (hotspot not reqd).
b) Users should be restricted internet access via hotspot verification. Only allowed users should access internet and URL 172.30.80.3 simultaneously, for rest only URL 172.30.80.3 is accessible.
c) DVR cam should be accesible from public IP as well and should be free of hotspot.
d) Setup a VPN server on MT so that users can dial into it via public ip and can access URL 172.30.80.3 remotely as it happens over LAN.
Note : I cannot modify or change values on CISCO router as it is not managed by us and we are only allowed to access the above mentioned URL.
I can understand its a lot of asking but a generous help will be highly appreciated.
Thnx in Advance.