Multiple DHCP Gateways, single RF Link

RouterOS Wireless Networking
1

Hi,

I want to connect two DHCP routers with different IP address ranges to one R532 board with 1 XR5 radio card. On the other end is a R532 + XR5 with 2 Cisco access points. I want one Cisco AP to handle traffic from one of the DHCP routers, and the same for the other AP.

I can only have 1 RF link between the two points, hence the single XR5 on each R532

Each Cisco AP has an IP address set to the corresponding router on the other end.

Problem is I don’t want a DHCP client on one AP getting an IP address from the wrong router.

Can someone help me work out how to do this? I can provide additional details as necessary.

Thanks!
John

2

Use VLAN’s or turn off DHCP

3

I put up a page on my website with the schematic of what I need. Can anyone tell me how to do this with Winbox if possible?

http://www.onalot.com/images/MikrotikSchematic.jpg

Thanks!

John