Multiple VLANs on multiple interfaces

[Phenfinite]

There are probably a lot of threads regarding this, but I can’t find a specific thing that suits my needs; so if someone can point me in the direction I need that’d be great!

Basically I have a CRS326-24G, and I need to set up 6 interfaces, ether1 > ether6 to have roughly 30 different tagged VLANs on them. Each VLAN should have it’s own IP address, and they should be able to communicate with each other. Seems a bit odd but it’s for a lab environment and this is needed. After that, I need to enable IGMP snooping and PIM-SM on each of these VLANs. What would be the best way to achieve this? More specifically I’m curious about the VLAN part, RouterOS seems to be a bit “different” from what I’m used to for VLAN stuff.

Thanks a bunch!

P

[kamillo]

You can start here:

• https://wiki.mikrotik.com/wiki/Manual:CRS3xx_series_switches
  
  
  
• https://wiki.mikrotik.com/wiki/Manual:Basic_VLAN_switching#CRS3xx_series_switches

[mkx]

In addition to what @kamillo wrote: beware that CRS are switches hardware-wise, not routers. Meaning that while being able of routing your unit won’t be able to route traffic between VLANs with any decent speed.