My first mikrotik help :)

RouterOS Beginner Basics
1

First my appologis on bad english :slight_smile:. I got mikrotik routerboard 951-2n router. Well i created PPPoE connction and successful added ip reservation for one pc ip 192.168.88.150, now i need to open port 5900 for that ip so i can remotely access to my pc over internet. Now i’m not sure witch interface to use pppoe or ether1-gateway. in my defence i will tell that this is my first mikrotik, sorry if i made a mistake on witch forum i post. So i hope that someone will write me a step by step greetings or write terminal steps, thank you all in advance.

greetings from Bosnia and Herzegowina

2

Hi try this:

/ip firewall nat add chain=dstnat protocol=tcp dst-port=5900 action=dst-nat to-address=192.168.55.150

Ade

3

You have to add also public ip address as dst-address parameter or in-interface=pppoe