Need Advice on PCC Load Balancing (MikroTik RB450Gx4, RouterOS v7)

RouterOS
1

Hi everyone,

I need some advice regarding a PCC load balancing setup.

I’m using a MikroTik RB450Gx4 running RouterOS v7, with two ISPs that have different bandwidths:

  • ISP 1: 30 Mbps

  • ISP 2: 100 Mbps

I’m planning to use PCC (Per Connection Classifier) for load balancing.
Port 3 is connected to Access Point 1, and port 4 is connected to Access Point 2.
Each access point is limited to 50 Mbps bandwidth.

Could anyone recommend a good and stable PCC method (ratio, rules, or best practices) for this setup?
Any example configuration or suggestions would be greatly appreciated.

Thanks in advance :folded_hands:

2

Hi,

How many times do you want to start the same topic?

Closing.

1 Like