Need help in Network and VPN

RouterOS General
1

Dear All,

i am writing this post after i read alot and manage to do the below but still i have something wrong

I have a RB951Ui-2HnD router with ver 6.43.12.

I have created 2 WLAN networks connected to Internet via WAN. both networks have separate IP Pool, DHCP Server and Bridge.

Then I connect WLAN 1 network directly to Internet and WLAN 2 to internet but thru VPN.

WLAN 1 (10.10.10.1) access internet normally.
WLAN 2 (10.10.20.1) access internet thru VPN.

the problem i am facing that the WLAN 2 is too slow (max speed 2MB) and my actual internet connection is 50 MB

I did the firewall setup (NAT and Mangle), DNS and router list.

so if someone have an idea or can help me to make the speed better or configuration simpler he/she are most welcome.

thanks a lot

2

If you setup the VPN connection on your PC do you still get the 2MB?

3

No, if i connect the VPN on my PC i get more than 2MB, and if i connect to the router via LAN i got much faster.

is there a possibility that my router WIFI did not work correctly. coz if i connect via LAN i got full 50MB normal and VPN around 10MB but not these number not via WIFI.

should i replace the router???


thanks

4

Can you export your routers PPP and Wireless configs?

To export the PPP settings:
ppp export hide-sensitive

To export the Wireless settings:
interface wireless export hide-sensitive

You can also export the full configuration of your router:
export hide-sensitive

The “hide-sensitive” part will hide your passwords.