Need help with WISP

RouterOS Beginner Basics
1

hello guys ! i know im asking alot but i need some help.
im starting up a wisp, and im about to have the fiber optical. i had a partner .. but things changed anyway.
i reseted the RB and got 1 setup online in 2 days of work without knowning much …
here is my setup

( Main ) tower 1: RB433

  • 1 minipci 2.4mhz radius on a ovni
  • 1 minipci 900mhz beam 15 dbi horizontal NLOS to Tower 2
    ( i should maybe buy a 5 ghz setup ) as im living in a small town country side.

Tower 2: RB433

  • 1 minipci 900mhz beam 15 dbi horizontal NLOS to Tower 1
  • 1 minipci 2.4mhz radius on a ovni
  • 1 minipci 900mhz radius on a ovni

I need help to set this setup ,users and bandwidth management and a hotspot
do i need anything else ?

Also Bad blocks went 2.3% to 2.9% in the 2 days of work
is that normal ? can i do anything to help on that ?

Thanks alot for for helping me out guys !!

2

support ?

3

With something like this you should probably hire a consultant.
http://www.mikrotik.com/consultants.html

4

Thanks alot for your helpfull info !! few hints would have work perfectly also

5

These are some of the basic things you might want to have correct to have a successful WISP. There are just so many variables that it is hard to tell you exactly what you would need. But this is a good start for your reading.

http://wiki.mikrotik.com/wiki/How_to_setup_up_RADIUS_for_use_with_MikroTik_-_By_Ramona
http://wiki.mikrotik.com/wiki/Manual:Interface/PPPoE
http://wiki.mikrotik.com/wiki/Manual:HTB
http://wiki.mikrotik.com/wiki/Manual:Queue
http://wiki.mikrotik.com/wiki/Manual:Routing/OSPF and maybe with http://wiki.mikrotik.com/wiki/Manual:MPLS

6

We are seeing same type of NAND corruption leading to system failure. We are looking for more data to help determine root cause.

Any additional info, please add to http://forum.mikrotik.com/t/hardware-issues-with-rb4xx/56059/1 thread.

Thanks