need to show ccq & noise floor for rb 911

RouterOS The Dude
1

Hello
need to show ccq & noise floor for rb 911
which is the best way to do that

2

please how i can do that

3

Use the proper OIDs…

You can get the OIDs for any section in the CLI:

/interface wireless> print oid 
 0 tx-rate=.1.3.6.1.4.1.14988.1.1.1.3.1.2.9 
   rx-rate=.1.3.6.1.4.1.14988.1.1.1.3.1.3.9 
   ssid=.1.3.6.1.4.1.14988.1.1.1.3.1.4.9 
   bssid=.1.3.6.1.4.1.14988.1.1.1.3.1.5.9 
   client-count=.1.3.6.1.4.1.14988.1.1.1.3.1.6.9 
   frequency=.1.3.6.1.4.1.14988.1.1.1.3.1.7.9 
   band=.1.3.6.1.4.1.14988.1.1.1.3.1.8.9 
   noise-floor=.1.3.6.1.4.1.14988.1.1.1.3.1.9.9 
   overall-ccq=.1.3.6.1.4.1.14988.1.1.1.3.1.10.9
4

check you have the updated MIB loaded on the dude and do a snmp walk to check proper oid

create a probes like this
probe1.jpg
probe2.jpg
probe3.png

5

then add services to devices using created probes
services.jpg