Hi!
I am trying make an update. On the console I see
Got IP address: 192.168.1.66
resolved mac address 00:1D:72:90:6F:29
transfer started … transfer ok, time=3.13s
setting up elf image… OK
jumping to kernel code
Welcome to MikroTik Router Software remote installation 6.39.2
Press Ctrl-Alt-Delete to abortmac-address: D4:CA:6D:01:2C:xx
mac-address: D4:CA:6D:01:2C:xx
mac-address: D4:CA:6D:01:2C:xx
mac-address: D4:CA:6D:01:2C:xx
mac-address: D4:CA:6D:01:2C:xx
mac-address: D4:CA:6D:01:2C:xx
mac-address: D4:CA:6D:01:2C:xx
mac-address: D4:CA:6D:01:2C:xx
mac-address: D4:CA:6D:01:2C:xx
mac-address: D4:CA:6D:01:2C:xxsoftware-id: MY-soft_ID key:
MY_key ID xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx==Waiting for installation server…
but netinstall doesn’t see my ccr router Routers/Drives window is empty
Could somebody tell me what is going on ?
I turned off remains network interfaces so the interface that rb is connected to is the only one active
The other ccr1036 is visible for netinstall, so it might be a hardware problem, I tried different versions of netinstall, the same
what is interesting , I took eeprom from ccr1012 and I soldered its on the ccr1036 mainboard then is discoverable of course as 1016 but netinstall can see my ccr. I can install soft on Nand (of course I get softid problem and ports are not visible in winbox). When I took eeprom from the other ccr1036 the situation is the same , completely invisible for \netinstall. Unfortunately I formatted Nand in the meantime so now I can only get into Routerboot nothing more.
May it be broken AR8033-Al1A chipset ? but if yes why there is any communication between netinstall an ccr ?
thanks in advance
Marcin