Netinstall hangs with "Waiting for Drivers..." message

RouterOS Beginner Basics
1

Trying to netinstall to a Dell R310 server with Sata Drive. I get the Welcome to Mikrotik Router Software remote Installation and then I get a list of 4 MAC addresses and the “Waiting for drivers…” message.

The Dell has two native ether ports on the MB. I have had a four port ethernet card also installed. I assume the 4 mac addresses are the ports of the ethernet card with 4 ports. These are supposed to be Intel ethernet ports.

I’m at a loss…can anyone make a suggestion to be able to proceed with this install?

Thanks,
Jim

PS The target computer doews not show up the the Netinstall Routers/Drives window.

2

when you get that message, try to unplug the ethernet cable from the onboard card and plug to the card that has of those 4 listed MAC address, it will continue to send the driver from those card and continue with the install process.

3

Thank you. That did the trick. All is fine and MT is installed!

btw, I was running NetInstall from my Win7 x64 system and it was flawless after following your advise.

4

I have problems with a RouterOs5.12 R310 to install … I get error when I try it from the CD.
Can not find the disc.
Thks for all response..!!!