Hello everyone, yesterday i got new job with mikrotik devices, i need to build network with cameras, whole idea is to send few signals form Mikrotik SXT to Ap with is model Mikrotik OmniTK5 and then connect by ethernet cable to video recorder. So i do research and make ap birdge with this tutorial https://wiki.mikrotik.com/wiki/Manual:Wireless_AP_Client . It works when i am connected to AP i can ping device witch is SXT next room, Unfortunately my video recorder dont see cameras with is in same switch as sxt i tried to make some bridge in SXT (eth and wlan) but still i dont see camera. Sorry for my bad english. I hope u can help me 
Here is image that might help :https://ibb.co/c1NpCb
What you can try first is to make sure all the MT devices is running the same version of routerOS
A few updates back they changed something with rstp witch may cause the funniness you are experiencing
Hello,
From your diagram, your client SXTs should be in station-mode. That way, all devices will be in the same layer 2 subnet.
Keep ether1 and wlan1 bridged and you should be good!
Regards,
Sent from Tapatalk
Correction:
Mode=station-bridge
Sorry!!
Sent from Tapatalk