hi i have new CCR2116 from store
just testing sfp+ for a couple of day
today i’m restart from terminal, but the console message showing error
from begining i’m pluging M.2 NVME for container
WD Blue 250G
yesterday when i try to restart, sometime PCIE NVME not detected
already tried net install, no success
i already have supout.rif file
tage2_loader v3.63.2
Memory repair completed within 226 uSecs
DDR ECC static poisoning address: (0x1e0000)
DDR ECC static poisoning address: (0x1e1100)
SPD I2C Address: 52, offset 0000(0)
DRAM ch 0: 8GB
SPD I2C Address: 53, offset 0000(0)
PHY init error (808000FF)!
DX0: PASS
DX1: PASS
DX2: PASS
DX3: PASS
DX4: PASS
DX5: Write Level Adjust Error, Failing ranks bitwise 0x01
DX6: PASS
DX7: PASS
DX8: PASS
PHY init error (808000FF)!
DX0: PASS
DX1: PASS
DX2: PASS
DX3: PASS
DX4: PASS
DX5: Write Level Adjust Error, Failing ranks bitwise 0x01
DX6: PASS
DX7: PASS
DX8: PASS
PHY init error (808000FF)!
DX0: PASS
DX1: PASS
DX2: PASS
DX3: PASS
DX4: PASS
DX5: Write Level Adjust Error, Failing ranks bitwise 0x01
DX6: PASS
DX7: PASS
DX8: PASS
PHY init error (808000FF)!
DX0: PASS
DX1: PASS
DX2: PASS
DX3: PASS
DX4: PASS
DX5: Write Level Adjust Error, Failing ranks bitwise 0x01
DX6: PASS
DX7: PASS
DX8: PASS
PHY init error (808000FF)!
DX0: PASS
DX1: PASS
DX2: PASS
DX3: PASS
DX4: PASS
DX5: Write Level Adjust Error, Failing ranks bitwise 0x01
DX6: PASS
DX7: PASS
DX8: PASS
PHY init error (808000FF)!
DX0: PASS
DX1: PASS
DX2: PASS
DX3: PASS
DX4: PASS
DX5: Write Level Adjust Error, Failing ranks bitwise 0x01
DX6: PASS
DX7: PASS
DX8: PASS
PHY init error (808000FF)!
DX0: PASS
DX1: PASS
DX2: PASS
DX3: PASS
DX4: PASS
DX5: Write Level Adjust Error, Failing ranks bitwise 0x01
DX6: PASS
DX7: PASS
DX8: PASS
PHY init error (808000FF)!
DX0: PASS
DX1: PASS
DX2: PASS
DX3: PASS
DX4: PASS
DX5: Write Level Adjust Error, Failing ranks bitwise 0x01
DX6: PASS
DX7: PASS
DX8: PASS
PHY init error (808000FF)!
DX0: PASS
DX1: PASS
DX2: PASS
DX3: PASS
DX4: PASS
DX5: Write Level Adjust Error, Failing ranks bitwise 0x01
DX6: PASS
DX7: PASS
DX8: PASS
PHY init error (808000FF)!
DX0: PASS
DX1: PASS
DX2: PASS
DX3: PASS
DX4: PASS
DX5: Write Level Adjust Error, Failing ranks bitwise 0x01
DX6: PASS
DX7: PASS
DX8: PASS
al_ddr_init(1) failed!
ddr_init_ch(1) failed!