New installed RB450G with VDSL 50/10MBit no traffic possible

RouterOS General
1

Hi @all
My running System:
Cable Modem----(DHCP Client)Mikrotik5.6X86----Network
Everything is working fine, with traffic filter, vpn, etc…

My problem, new Setup:
VDSL Modem----Mikrotik RB450G 5.7----Network

VDSL Modem is synchronised, with the original router the connection is ok and working (Easybox)
(The VDSL is an Germany Vodafone VDSL 50/10Mbit connection)

The VDSL Modem is connected to teh RB via ethernetport 5
The Homenetwork ist connected at ethernetport 1

At Port 5 i setup VLAN1 with TagID 132 (this is right, i take these setting from the original router…)
The PPPOE Client is working over VLAN1 and get a IP Address from the provider

To here i think everything is setup fine!


My problem now is the RB cannot be pinged from the Internet AND it is not possible to ping to the Internet (ie. google.de → 209.85.148.105) from the network and also direct from the RB!

Now i take back all settings, only a NAT for teh network is set…
(At the screenshot you´ll see the settings)


Someone can help me??
No traffic is passing from network to tnternet and from tnternet to network (no ping working etc.)
DSL_Status.JPG
winbox.JPG

2

Try it without vlan for troubleshooting purposes, to see if it works that way.

3

Hi jandafields.
I tried to connect the pppoe client without vlan, the connection cannot be established… (dialing-disconnected-dialing-disconnected) no answer!
I think VDSL has always to be connected over vlan…?!

I take back the settings (to connect over vlan) an the connection is back!

In the picture youll see the original router settings:
easybox.JPG

4

Did you ever get this to work? How did you setup your pppoe client?

5

the example screenshot from the vodafone unit seems like it could be a QinQ tagging on the VDSL router.

Once the PPPoE is established you could torch the interface and see if it is getting frames with another VLAN ID maybe ?