Hello All. I am a mikrotik noobie and I am looking for some help. I am willing to pay for an experienced technician to help set
up and document my configuration. I want to add users and capacity, locations, and control, that is why I am switching to MT.
I am currently supplying Internet to about 30 customers in 4 office buildings and a couple single wireless destinations. One of the buildings (1/2 of the customers) are is the building with the noc. Some customers need a single static IP. Most need private DHCP addresses. This is currently an open network with nat’d customers going over one wan and static ip customers going over another.
I have come up with the following basic diagram of how things might be connected.
Staic IP address in NOC ---------------------- Public IPs
Public Static IP . . . . .
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
MT AP
Dynamic Private IP – . . . . . . .\ . 2x MT . / Wan Interface Private - Nat - Public Ip
. . . . . . . . . . . . . . . . . . . . . . . . >PPPoE<
. . . . . . . . . . . . . . . . . . . . . . . / . . . | . . . \ Wan Interface Public
Dynamic Private IP – Ethernet. . . |
. . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . . . . . . . . . . . . . . . . . . . . . . . Radius
. . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . . . . . . . . . . . . . . . . . . . . Customer Database
-
-
-
-
-
-
-
-
-
-
-
-
-
-
This does not address how to connect to the 2 customers that need routing nor any redundancy, both of which I want to implement.
I have some equipment to use for this project, 2x C3 800MHz systems with 256mb cf and 512MB Memory that I plan to use for PPPoE. Several servers on which I can install radius. And currently 1 RB532 with MT level 5 loaded. I want to create a mySQL customer database tied to radius.
Does anyone have any suggestions to my plan before I start some action and possibly hire one of you to remotely help with the actual setup.