Hi all!
I need to configure usermanager and I have some questions.
There is manual for new usermanager?
I need to know how configure user–> wireless
Wireless->
Preshared key:
Enc key:
Enc algo:
What is the configuration in usermanager GUI and winbox?
Thanks..
Please mikrotik guys! I need some help! 
let’s start by moving your topic to the correct forum section
sorry…
There is any example or something to configure wireless section?
http://wiki.mikrotik.com/wiki/User_Manager/Wireless_Example
I recommend to start from the link above.
For
Preshared key: Set this key for WPA/WPA2 (the same as WPA Pre-Shared Key/WPA2 Pre-Shared Key in Winbox).
Enc key: leave it blank for WPA/WPA2.
Enc algo: select AES-CCM or TKIP (AES is more recommended);
Thanks!! and sorry to put this message in wrong site..
Two last question..
Wireless clients should be Mikrotik? I try with laptop and log: got RADIUS accept for XX:XX:XX:XX:XX:XX on wlan1, but failed to validate encryption key.
UserManager support EAP authentication?
Thanks!
I follow the steps in manual but if I don’t active WEP or WPA in wireless security profiles, then the comunication is not encrypted.
If in security profiles leave Mode: none (encryption) then RADIUS users can connect via wireless!!
But if I set Mode: dinamyc keys then users cannot connect..
I need RADIUS wireless users connection ecnrypted.
anyone have any idea about it?
UserManager support EAP authentication?
No.
If in security profiles leave Mode: none (encryption) then RADIUS users can connect via wireless!!
But if I set Mode: dinamyc keys then users cannot connect..
I need RADIUS wireless users connection ecnrypted.
Use mode=dynamic-keys
Configure WPA/WPA2 PSK on client laptop.
Ok… but what is the function of wireless parameter in usermanager v5? wireless key?
If I configure security profile with dynamic keys wpa psk then I put a unique key.. I don’t understand what is the function of parameters (wireless encryption) in usermanager v5
Anybody know about this?
For
Preshared key: Set this key for WPA/WPA2 (the same as WPA Pre-Shared Key/WPA2 Pre-Shared Key in Winbox).
Enc key: leave it blank for WPA/WPA2.
Enc algo: select AES-CCM or TKIP (AES is more recommended);
Which key do you mean? Please post screenshot!
This paramaeters
Did you see my post above?
Preshared key: Set this key for WPA/WPA2 (the same as WPA Pre-Shared Key/WPA2 Pre-Shared Key in Winbox).
Enc key: leave it blank for WPA/WPA2.
Enc algo: select AES-CCM or TKIP (AES is more recommended);
I don’t understand the function of parameters “preshared key” and “Enc algo”. I set this parameters to user and nothing happen.. The problem is I don’t understand how to use this paramaters.
Sorry 
Sergejs clearly posted their function! Is it so hard to read?
Preshared key: This is the WPA key (wireless password)
Enc key: ignore this setting (leave empty)
Enc algo: select AES-CCM
Ok but how can I use this parameters???
I set a user with a MAC? or I set user with username and password?? This parameters work with hotspot?
Can I configure user demo with this parameters and the connection will be encrypted??
Or not work with hotspot? Only work with wireless? (no hotspot, no ppp, no login)
If work with wireless I need to configure user with MAC address??
I test all this functionalities and any work! I don’t say this system not work! Only say that I don’t undestand how it work and only I need a help..
Thanks for patience
your questions indicate that your understanding of networking and RouterOS in general is very low, I advise you to take some mikrotik training course, or watch online tutorials;
http://gregsowell.com/?page_id=951
http://www.tiktube.com/?category=8
And normis I don’t need this comments..
I say: The problem is I don’t understand how to use this paramaters.
It’s so hard to put and example??