Newsletter 75, January 2017

In this MikroTik newsletter:

  • new low cost 2.4GHz cAP lite, $29
  • new low cost 5GHz 21dBi CPE DISC Lite5, $48
  • new SwOS powered 24-port switch CSS326-24G-2S+RM, $139
  • new CRS106-1C-5S with 5 x SFP ports and combo port, $59
  • TR-069 improvements in 6.39rc
  • dual boot feature
  • MUM 2017 schedule

Download the newsletter here:
http://mt.lv/news75

MikroTik Team

Great to see new products and features !

NB: one small error in link “View online” for product CRS106-1C-5S ==> the link redirect to routerboard but page of CSS326-24G-2S+RM.

CRS125 also will bee bootable in dual boot?? RouterOS and SWos??

No, only CRS3xx series, like the article says.

I’m so excited about the coming CRS326-24G-2S+! Would you mind to share us some specs? I hope for a stronger CPU and an all POE version.

Also the CSS326 looks great! Maybe some of these features could be included in the next SwOS releases:

  • LACP
    QoS
    MSTP
    DHCP-Snooping
    SNMPv3
    LLDP
    LLDP-MED
    POE (802.3af/802.3at)

Any chance that IGMP Snooping will be offered in the RB326? :confused:

Also, can someone confirm, whether or not, the CR326 has a console port?

Thanks,

-tp

Regarding the cAP lite…

if you really like to fit the design with the
environment, we are providing 3D printer
friendly design files

Now this is a step fitting for 2017. Congratulations!

Need a home AP LTE device

Sent from my C6833 using Tapatalk

I think, there is no serial port on this device

Since this is a SwOS device it has no console support.
And one can not run RouterOS on it later on, because it has only 2MB of flash.
So why would it need a console port?

Why it’s written in product specification?
Serial port RJ45 :open_mouth: https://routerboard.com/CSS326-24G-2SplusRM

I don’t see any reference to a RJ45 console port in the description.
If it was there, it is corrected by now.

It was there, but now it’s gone - it seems they corrected it.

We will have a WAP LTE Kit this year.

Excited about new REVOLUTIONARY product announcements in MUM in italy… mu-mimo and/or gps sync :smiley:

It’s nice

me too, I was hoping for at new CRS226 with at least a 600mhz processor, because the 400Mhz processor is using 50% cpu now, and sometimes it hits 100% and then I loose the ping to the switch, I have about 100 of these switches, and need about 200 more, but holding on to see if they would upgrade the processor to a faster one, and maybe even an 48 port version of it

CRS is a switch. If you have 100% CPU, it means you are using it as a router. If you need a router, we have CCR series for that.

No sorry, i only use at as a switch, no routing functions enabled, we have tried to get an explanation from you many times, anf have sent config files, but mikrotik never replied us

All the routing are done in our 4 CCR1036-8G-2S+EM

I also have about 10 of these CRS125-24G-1S-RM and they are configured exactly as the crs226, only as switch, and they use sround 8-9% cpu, thats why i think the 226 woyld benefit from the same processor as the crs125

Im still hoping that the crs226 will get a better cpu in time

Sincerely

Carsten larsen