MikroTik newsletter November 2019 (#92)
Read our latest newsletter and learn more about:
MikroTik CAT6 product line – even higher LTE speed and new features,
Cube Lite60 - the most affordable 60 GHz CPE,
Linus Tech Tips and MikroTik,
upcoming MUM events and exciting details about the MUM Europe in Prague.
Normis, have you negotiated a special rate for accomodation during the Prague MUM? Where?
As far as I can see the hotel part of O2 will not open until 2021.
There is no hotel, the event is so big, that it will take place in a conference center. You can pick any hotel in Prague, the city is very nice and I recommend staying near the old town.
Thank you Normis, I will look.
However, considering the number of attendants, I assume that Mikrotik has the power to negotiate a good price in one ore more hotels..?
Also convenient to stay close to where other attendants are.
Hotels only negotiate price if we also book those rooms 
We don’t sponsor rooms for attendants.
I know you don’t sponsor.
But for most (all?) of the MUMs I have attended, you have negotiated special rates that we got using a registration code. A number of rooms were reserved, not booked.
Booking was made indiviually by the attendants on a first come, first serve basis.
However, I will look at booking.com.
Booking.com price is always better, even with MikroTik negotiated deals. Booking.com promises to lower the rate, if you find cheaper price
Seriously what a fail, you put CAT6 modems capable of up to 300mbit and than you put 100mbit lan ports on those 2 external routers?
in this case CAT6 is not about speed, but about better coverage. Using the aggregation feature, you can get better signal, where there was no signal before. Otherwise you would not need such a big antenna, if we would be aiming for speed in good coverage areas.
Did you notice that the 100Mbit port is only on the large antenna products? The smaller indoor/city units have Gigabit.
ivicask:
This is something that puzzles me as well: MT try to save dimes by adding Fast Ethernet NICs instead of GB, use plastic RJ45 sockets that break in the cold (RB711 and indeed a long time ago, eventually they realized the failure but still…), failed to add buzzers to many of their RBs, failed to add the universal bracket used by Omnitik, SXT and Disc for years to the SXT sq in order to decrease package size, add 0,4A Power Supplies along with the SXT sq and Disc…which are much more prone to failure by overvoltage spikes.
I’d rather pay $1 extra for each of these features 
That said, I’m a long time user of MT products and I love them, but saving a few cents on things like this seems meaningless to me 
Cool, MUM in Prague will be BIG event at excellent place!
Note, as in any other “tourist popular” city there are waiting for you some tourist traps which could ruin your experience.
Check few HONEST GUIDE: PRAGUE short clips here to be smarted and prepared and get honest advice for places to visit
https://www.youtube.com/playlist?list=PLM9_KZNJw8qGuEHJf4lcfIiGwpiRtcKAm
At least this one: https://www.youtube.com/watch?v=EFhaee9SM7w
Enjoy your visit to Czech Republic!
Yes, but this external router have better antena, comboed with CAt6 + 1Gbit LAN would be dream device for our customers.
The inside model will have signal issues, even prev models have very problematic signal and speeds compared to similar priced product from like Huawei.
Currently providers in Croatia give routers like Huawei B525, which is CAt6 without CA,for example at one customer inside it reaches around 40-50mbits, while when you connect small external (outside)antennas they go to 150mbit, even placing them outside sometimes doubles speed, but of course those arent external modems.
I was hoping for product like this where i can avoid external antennas and get max signal by placing router outside, but with this 100mbit ports this dream falls in water for now.
Hope you listen to us and gives us model with 1gig ports in future, and even higher CAT modems.
So get the LtAP with external antenna. Or wAP ac. They have gigabit ports.
where can i find such external antenna for LtAP from Mikrotik? Does it exists?
Uldis, you can use any antenna, as long as it has the connector to fit on the LTE card, and is made for the frequency you will use (need to check your mobile operator band)
We do offer LTE cables and antenna, but there could be more offers in eBay or elsewhere: https://mikrotik.com/products/group/lte-products
And when we will see the switches offered in Last EU MUM?
Next year or not?
When is the ETA for the netPower switches? Its already year end.
I have the same comment re 100 Mbps Ethernet ports with the Cube Lite60. Seems crazy to me. I wouldn’t mind so much but there is no 1Gbps version. I really can’t see why anyone would buy it with only a 100 Mbps port on it.
It’s a low cost CPE for using 8 CPE + 1 AP. If you split one gigabit to 8 CPEs, you don’t need more than 100Mbit.
We have other models with 1Gbit ports, if you are interested, but not the CUBE
“If you split one gigabit to 8 CPEs, you don’t need more than 100Mbit.”
I beg to differ, as I suspect would most Wireless ISPs!
Also, you market them as good for 800m point to point links - we would certainly buy them for that - but not with a 100 Mbps cap on throughput.
And, they would also be excellent for “feeding” the 60GHz AP device locations - but not with a 100 Mbps cap on throughput to the AP.
We never buy the Lite 60 GHz SXTsq for the same reasons, only the “heavy” ones (ie, the wAP 60G with 1Gbps ports).
Sorry, but I really do not understand the logic here.