Hi there,
i’ve a problem with my new MikroTik setup: I have an ISP who installed an antenna on my roof and I got one cable, which is DHCP enabled by the ISPs roof antenna / modem (192.168.1.0/24)
All devices get an private IP from the DHCP on the roof, no router needed. Following requirements I have now:
- multiple wired device connect to local (home) network
- multiple wireless devices connected to local (home) network
- create a guest network to connect wireless untrusted devices locally in local (guest) network some ethernet ports need to be guest network enabled
So I brought a CRS326 and three WAPac to get everything working and get all devices running and create a guest network.
I would like to provision two WAPac in my local home network and one as guest access point. Since the guest area is elsewhere I don’t publish the network thought virtual interfaces.
I created a bridge, DHCP-Client enabled and got an IP from my ISP. My wired clients on Port 1-20 get Its from my ISP too.
I created a CAPSMAN and added my WAPac. All my home network devices also get Its from my ISP.
Now the problem:
I created a guest-bridge (192.168.15.1/24) with a DHCP. (192.168.15.0/24) Neither on the wireless AP nor on the interfaces 21-24 I’ve got internet access. I created a masquerade rule but that don’t helps.
I disabled all firewall rules. Nothing should be blocked.
Any ideas, how I can solve the problem, while getting my IPs from my ISP.
Thanks, BR wsbrt