No power consumption measure available for CCR2216-1G-12XS-2XQ?

RouterOS General
1

When comparing the system health of an CCR1009-7G-1C-1S+ running RouterOS 6.49.8:


> /system health print 
                    fan-mode: auto
                     use-fan: main
                  active-fan: main
          cpu-overtemp-check: yes
      cpu-overtemp-threshold: 100C
  cpu-overtemp-startup-delay: 1m
                     voltage: 24.1V
                     current: 921mA
                 temperature: 38C
             cpu-temperature: 53C
           power-consumption: 22.3W
                  psu1-state: ok
                  psu2-state: ok
                  fan1-speed: 7881RPM

with a brand new CCR2216-1G-12XS-2XQ running RouterOS 7.11:

/system/health/print 
Columns: NAME, VALUE, TYPE
#  NAME                VALUE  TYPE
0  cpu-temperature     57     C   
1  switch-temperature  42     C   
2  fan1-speed          3480   RPM 
3  fan2-speed          3630   RPM 
4  fan3-speed          3750   RPM 
5  fan4-speed          3660   RPM 
6  board-temperature1  27     C   
7  board-temperature2  25     C   
8  psu1-state          ok         
9  psu2-state          fail

I was wondering why there is not power consumption shown?
Is that not available for RouterOS7 (yet)? Or not for the CCR2216-1G-12XS-2XQ at all?

2

For anyone interested: I got the info that this device does NOT have the HW capability to measure the current power draw.