not able to communicate between Ether1 and WLAN1 - Help Needed Urgently!!

RouterOS General
1

hi,

i have a 2Ghz Groove.

Ether1 is set to obtain IP address from the primary LAN via DHCP. (10.10.1.1/8)

WLAN1 is given a static IP (192.168.1.1) and has its own DHCP to lease IP to clients.

the following rule is present.
/ip firewall nat add chain=srcnat action=masquerade out-interface=ether1

but now the client on WLAN1 cannot communicate with the clients connected to Ether1. am i missing something?

its bit urgent!!!

2

How look the routes on the groove and how on the wlan clients?

3

Proxy ARP?