Nstreme dual Link! How?

RouterOS Wireless Networking
1

I’need help for this Question :confused:
How I’must set my Internal Router to work with nstreme dual link?
Is this right to make nstreme dual I must have 4 Radios, in my case I will use 4 RB SXT ac 28 °, two for downstream and two for upstream, is this right then I’ve a full duplex Link?
My Question is how must I setup the Internal Router behind the nstreme dual link? Bridge two ether ports to divide up and downstream, or is dual wan setup required?

2

http://wiki.mikrotik.com/wiki/Dual_Setup_with_OSPF
This is just one example.

3

Thank you I’ve readed the Link! But on the img. they use cards, possivle cards with two wlans on each card, my question is can I use 4 SXT ac devices two mount the dual Link? :confused:

4

Of course you can, just imagine your SXT’s are wlan cards and set them accordingly. You also need one mikrotik router at each end for the settings.

5

I’ve just found my first bonding result. Sadly the tutorial no longer exist. I’ve used 4xSXT and 2xRB750GL.
http://community.ubnt.com/t5/Business-Talk/Bonding-2-wireless-links/td-p/194143

Found it : http://wiki.specialistoff.net/index.php/MikroTik%2BUbiquiti:Bonding

It was a better choice for me than full duplex.

6

I’ve found a better and faster solution; I’ll use fiber óptic cable to get the band from my isp, distance to push the cable is 1800m!!!

7

Hi Inox,

Don’t you have any problem with bonding in this scenario ?? i’ve never used bonding on real world , but in lab it always is unstable and unreliable ,too many packet loss , specially with link aggregation

would you tell me more about your experience ??

thank you

8

It worked without any problems for 2 years.

9

I decided to use fiberglass cable, which cost me 30% more, compared to the quality is much better, I have also the possibility to rent my cable for multi media, IP Cameras, etc. !!! :laughing:

10

I’do not use other devices, iám only use Routerboards !!! :sunglasses: