I have an RB1000 with the ntp package. ntp client configured, but the ntp client will never sync time. The status stays on ‘started’.
[bakkerl@net] /system ntp client> print
enabled: yes
mode: unicast
primary-ntp: 194.109.64.200
secondary-ntp: 213.132.202.192
status: started
[bakkerl@net] /system ntp client>
On this same rb1000 there are 6 metarouters, all with ntp client, which are working without any problem. Only the host has the issue.
And can there ntp/time problems, cause an error with the watch-dog?