ntp client on RB doesn't work

RouterOS General
1

Hello
I have made the configuration in my computer - that it will work as a ntp server
as written here:

http://social.technet.microsoft.com/Forums/windowsserver/en-US/ffb1df0b-7c6e-4b2d-8fdf-b4ca0c014266/configuring-windows-7-as-an-ntp-server?forum=winserverPN

the IP of the computer is 10.0.0.61
the configuration in the router is -

/system ntp client
set enabled=yes primary-ntp=10.0.0.61

anyone ever done this ?
I think my problem is in the windows - but how can I see what is the problem?

Thanks,

2

why you want your pc as ntp server?
usually it’s better to set up ntp client with global ntp server addresses, e.g:

system ntp client set mode=unicast primary-ntp=193.204.114.232 
secondary-ntp=193.204.114.233 enabled=yes
3

You can check in the /ip firewall connections to see if port 123udp is active when router tries to get the time.
Also disable windows firewall or add port exemption.

4

my router isn’t connected to the internet - this is why I need to use my computer as NTP server


this is what I did
remove the firewall - saw it’s working and them open the port

Thanks ,

5

Antivirus sometimes automatically enables firewall on windows.
You should add exemption for that port