It seems that NV2 does not work with 5 Mhz Channel bandwith. (5.0 rc8, RB SXT)
Using that, we get heavy packet loss and very low link bandwith.
No problem with 10,20 and 40 Mhz channel bandwith.
QOS does not work for me if using station WDS mode.
please contact support about this problem.
How did you test the QOS problem?
QOS was tested sending pings during a heavy UDP trafic session from bandwith test tool.
With station bridge mode, setting priority = 7 in output mangle for ICMP at each RB SXT end do allow to get about 10 ms ping time instead of 100 - 200 ms without priority setting.
With station wds mode, priority settings do not have any effects. Ping times are very erratic.
This was tested with NV2 wireless protocol.