nv2 More than 40 km

On distance more than 40 km disgustingly work the nv2
Sharply level of a signal falls and level of noise raises. Inclusion interface deenergizing helps
on the bridge rx -70 to -84 noise -115 to -97
on the station bridge All in norm

You interchange the position of base and client options
The picture changes too
Problems on bridge




10:20:04 wireless,info 00:0C:42:62:E3:9A@wlan1: disconnected, control frame timeou
t
10:20:06 wireless,info 00:0C:42:62:E3:9A@wlan1: connected
10:20:09 wireless,info 00:0C:42:62:E3:9A@wlan1: disconnected, control frame timeou
t
10:20:10 wireless,info 00:0C:42:62:E3:9A@wlan1: connected
10:20:14 wireless,info 00:0C:42:62:E3:9A@wlan1: disconnected, control frame timeou
t
10:20:15 wireless,info 00:0C:42:62:E3:9A@wlan1: connected

nstreme Works without ruptures but a bit more slowly

nv2 42км r52Hn

tdma 4 ms
radius 50 км


56 km nv2 rb411 r52hn

11:16:49 wireless,info 00:0C:42:64:52:7B@wlan1: connected
11:51:54 wireless,info 00:0C:42:64:52:7B@wlan1: reconnecting
11:51:55 wireless,info 00:0C:42:64:52:7B@wlan1: connected
12:13:14 wireless,info 00:0C:42:64:52:7B@wlan1: reconnecting
12:13:14 wireless,info 00:0C:42:64:52:7B@wlan1: connected
12:24:30 wireless,info 00:0C:42:64:52:7B@wlan1: reconnecting
12:24:30 wireless,info 00:0C:42:64:52:7B@wlan1: connected
12:35:27 wireless,info 00:0C:42:64:52:7B@wlan1: reconnecting
12:35:28 wireless,info 00:0C:42:64:52:7B@wlan1: connected
12:37:08 wireless,info 00:0C:42:64:52:7B@wlan1: reconnecting
12:37:08 wireless,info 00:0C:42:64:52:7B@wlan1: connected
12:37:48 wireless,info 00:0C:42:64:52:7B@wlan1: reconnecting
12:37:48 wireless,info 00:0C:42:64:52:7B@wlan1: connected
12:40:38 wireless,info 00:0C:42:64:52:7B@wlan1: reconnecting
12:40:38 wireless,info 00:0C:42:64:52:7B@wlan1: connected

tdma 3ms
radius 60

I can help with testing nv2 on distances from 40 to 60 km

Also found that on my 43km link signal was very poor until upgrading to V5 do get disconnect, no beacon received now, though. However with NV2 pings higher with high spikes every so often, with 802.11 pings not higher than 3m/s.

You can show options and schedules?

On distance more than 40 km disgustingly work the nv2

What antenna’s are being used?

32 db grid dish.

32 db grid dish.

My understanding is
A grid is = http://www.interprojekt.com.pl/gold-wireless-goldsad56030-5ghz-30dbi-grid-antenna-p-363.html?currency=USD

A Dish is = http://www.interprojekt.com.pl/gold-wireless-goldsadd56034dp-5ghz-34dbi-dual-polarization-p-721.html

A mesh dish is = http://www.rfhamdesign.com/products/parabolicdishkit/1682909a390cc1b03/index.html

But not sure what a grid dish is?

About I use

http://sibdata.ru/catalog/cid/104/372.html
http://sibdata.ru/catalog/cid/139/560.html
http://www.spektr-tv.ru/supral1.2pol.php

radio r52Hn
RX\TX -67-67 180\180 43 km
RX\TX -72\72 90\90 78 km
RX\TX -55-55 300\300 31 km

About I use

http://sibdata.ru/catalog/cid/104/372.html
http://sibdata.ru/catalog/cid/139/560.html
http://www.spektr-tv.ru/supral1.2pol.php

radio r52Hn
RX\TX -67-67 180\180 43 km
RX\TX -72\72 90\90 78 km
RX\TX -55-55 300\300 31 km

OK (sorry don’t read Russian? ) but my guess from those links, you using a solid 1.2m offset dish, designed for (Диапазон частот, Ггц: 10,95-12,75 GHz) a Антенны стандарта MIMO onto this dish and using cable (8D-FB PVC - коаксиальный кабель 50 Ом,)

you have 3 links total and those are the data-rates on each link?
What nv2-cell-radius you tried on each of those links and what udp speed and ping times you saw?

(supral 1.2 + SXT5Hd F5100) 43 km cell radius 43 TDMA Perriod 5 ping 5 - 10 ms
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++


(2400) 31km cell radius 30 TDMA Period 2 ping 4 - 8 ms

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++



(2400) 43km cell radius 30 TDMA Period 2 ping 5- 10 ms

100 Mb nstreme ping 1 ms
nv2 Works astably Ticket#2011040366000031

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++