One bridge AP and multiple station APs

RouterOS Wireless Networking
1

Hi,

First time posting on here. I’m trying to setup a MikroTik hAP Lite router as a bridge AP to extend our LAN network. I have got it working by following this guide: https://wiki.mikrotik.com/wiki/Transparently_Bridge_two_Networks_without_using_WDS_(EoIP)

However, I would like to have one bridge AP and mutiple station APs. I have managed to get the wlan1 interfaces to talk to each other between the bridge AP and the multiple station APs, but I can’t get the ether interfaces to communicate. Is is possible to have one bridge and multiple stations APs? Or does it have to be a one-to-one situation?

Thanks,
Alex

2

You will need to use WDS. You the bridge wds interfaces to your bridge at AP.

Eg - AP:

wds1,2,3,4,5,6 bridged to bridge and ether1

client - lan bridged to wan.


client = station-wds
AP - AP-bridge and wds enabled - dynamic bridge - bridge