One CPE Multiple Client

RouterOS Wireless Networking
1

Hello Mikrotik Experts,
I need to know some thing about WISP setup. It’s been couple of months I started researching on Mikrotik & Ubnt forum.

  1. For 1-10km Redius from base station (with perfect LOS)which Radios are best, MT or Ubnt? as I read lots of manual,MT’s Radios are pretty high configuration than Ubnt. On the other hand Ubnt providing easy OS.
  2. There is a small office around 1km away from my proposed Base Station. I want to connect about 15 PC’s using single SXT Lite 5 with 512kbps bandwidth for each of the pc’s of that office. Is it possible by using switch? or any good advice. Can I manage all the 15 PC’s from the central RB2011UiAS of my Base Station?
    Please advice me the best way to satisfy my clients at low cost solution.
    Thanks for reading…
2

Your on Mikrotik forum - so naturally we will recommend Mikrotik always :smiley:

First do a frequency scan and find out if you have a clear (un-used or low usage) channels, as this will determine which equipment is required for the Wireless part of the project,

3

Thanks for your Replay n21roadie,

I’ve already done frequency test. 2.4 ghz & 5.8 both are free here. its a very small rural area. there are only four moble phone BTS around 1km away from my proposed base station. the cell phone bts r providing EDGE internet, not even 3g.

4

OK - If I have read correctly you want 10km broadcast radius,
Use sectors to achieve the coverage area required, SXT is OK for the 1Km link