Hello,
i'm configuring Microtik and accidentally set one address for 2 interfaces.
On most OS this will result in an error. How it works on Microtik? Is this a bug or a feature?
CCR1016-12S-1S+ with ROS 6.47.8
/ip address print
Flags: X - disabled, I - invalid, D - dynamic
ADDRESS NETWORK INTERFACE
3 10.25.0.5/30 10.25.0.4 sfplus1.1032
5 10.25.0.5/30 10.25.0.4 sfp4.1039
/ip arp print
Flags: X - disabled, I - invalid, H - DHCP, D - dynamic, P - published, C - complete
ADDRESS MAC-ADDRESS INTERFACE
2 DC 10.25.0.6 78:02:B1:57:D9:DF sfplus1.1032
3 DC 10.25.0.6 00:0C:30:23:35:00 sfp4.1039
/ip route print
Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U - unreachable, P - prohibit
DST-ADDRESS PREF-SRC GATEWAY DISTANCE
76 ADC 10.25.0.4/30 10.25.0.5 sfplus1.1032 0
sfp4.1039