Hi,
recently i set a openvpn concentrator on a rb2011 up. everything is working fine. the concentrator is routing networks behind the remote sites. i am using “ethernet” (bridging) as a method of connection.
here is a short chart what i applied:
[rb2011] -------------- [rb750]
inbound network
192.168.0.0/24
|
|
ovpn-in1 10.1.1.1 ------ ovpn-out1 10.1.1.2 inbound network 192.168.1.0/24
ovpn-in2 10.2.1.1 ------ ovpn-out2 10.2.1.2 inbound network 192.168.2.0/24
ovpn-in3 10.3.1.1 ------ ovpn-out3 10.3.1.2 inbound network 192.168.3.0/24
i am not able to access the inbound networks on the remote sides from the remote sides. (eg. 192.168.1.0/24 ↔ 192.168.2.0/24). I set up all the routes properly at both sides.
from plain openvpn i know that to achieve this, i need the “–client-to-client” flag. so, in fact, the behaviour of openvpn is properly.
but how can i set the “client-to-client” directive in routeros? is it implemented? any ideas for a workaround?
thank you for successtions,
greetings from germany