OpenVPN v6rc11 CCR1016-12G problem

RouterOS General
1

Hello. I have a problem with OpenVPN client after upgrading to CCR1016-12G. before was RB750
Connection resets after 10 seconds. Sometimes it works for a few minutes but then starts restarting again after 10s of connection time

Jan/02/1970 23:04:42 ovpn,debug gis: disconnected <nothing received for a while>
Jan/02/1970 23:04:42 ovpn,info gis: terminating... - nothing received for a while
Jan/02/1970 23:04:42 ovpn,info gis: disconnected

connection config

add add-default-route=no auth=sha1 certificate=cert3 cipher=aes256 \
    connect-to=xx.xx.xx.xx disabled=no mac-address=xx:xx:xx:xx:xx:xx \
    max-mtu=1500 mode=ethernet name=ovpn-gis password=xxxxx port=\
    1196 profile=default user=root

debug log attached

tryed rc7 rc8 rc9 rc10 the same problem

help plz
log.0-3.txt (112 KB)

2

anybody?

3

We can repeat the problem and we are working on the fix for this problem.

4

I have the same problem on CCR1016-12G 6.0rc11. Any news?

02:44:57 ovpn,info ovpn-out1: terminating... - nothing received for a while 
02:44:57 ovpn,info ovpn-out1: disconnected 
02:44:57 ovpn,info ovpn-out1: initializing... 
02:44:57 ovpn,info ovpn-out1: dialing... 
02:44:57 ovpn,info ovpn-out1: using encoding - BF-128-CBC/SHA1 
02:44:57 ovpn,info ovpn-out1: connected 
02:45:07 ovpn,info ovpn-out1: terminating... - nothing received for a while 
02:45:07 ovpn,info ovpn-out1: disconnected 
02:45:07 ovpn,info ovpn-out1: initializing... 
02:45:07 ovpn,info ovpn-out1: dialing... 
02:45:08 ovpn,info ovpn-out1: using encoding - BF-128-CBC/SHA1 
02:45:08 ovpn,info ovpn-out1: connected

It’s a RouterOS bug, when can we expect fix?

5

Fix for this bug will be in v6rc12

6

How about v5.x?

7

CCR supports only 6.x branch, in other devices running 5.x I don’t have problem with OpenVPN.

8

Have the same bug with OpenVPN on 6.43.2